Which Camshaft is better for the Street on a chevy 383?
XR258HR .480/.487 lift, LSA 110 1000-5000RPM XR264HR .487/.495 lift, LSA 110 1200-5200RPM XR270HR .495/.502 lift, LSA 110 1600- 5400RPM I was wondering would the smaller camshaft give me better street...
View Articlemost likley cause - I sold my scanner software?
My 98 Ford Windstar 3.8L has a miss at low RPM/ light throttle. but at mid/wide open throttle it runs fine / plenty of power /good gas mileage. I recently sold my scanner because of health issues so I...
View ArticleGaining experience
I'm learning a lot just by reading all the posts. Other than experience, what is the best way to learn upholstery? I've done all my sewing on an old singer 188KI that I rebuilt myself. It works ok for...
View ArticleTuning Tips and More MPG
With gas prices on the rise here is a lot of good basic tuning tips to stretch your $$ Improving Mileage, Performance, And Drivability On Carbureted Cars | RodAuthority
View ArticleL67/4L60E into 1972 Nova
Has anyone worked a setup like this? I've got it all laid out, but I don't want to proceed until I have all my ducks in a row. The wiring, while time consuming, is not impossible. I am just trying to...
View ArticleKit Cars......factory five
Hey guys. I have a FORD engine I got stuck with because a customer cancelled. I am working on selling it, but in the event it doesnt sell, I was wondering if you guys had any experience with a Factory...
View ArticleLooking forward to chatting with you
Building a 23 tbucket and wondering how zoomies will sound any takers? How bad will it affect my low end. I am running an aftermarket PBM block stroked to 383 with Brodix RR 200 heads 13 - 1...
View Articlelost 2nd gear in 700r4
Hope anyone on here can help a little. I have a 84 GMC , 305, 700r4. And out of nowhere I lost 2nd, but still have 4th. I just changed fluid and filter, not burnt all looked good , can get to 3rd with...
View Articlestall and gears
So my question is, 85 f-body, 355, 700r4, vette converter, internals upgraded, 327 gear. If running a cam such as comp 292, which will require a bigger stall, can you swap to a 3000 with the stock...
View Articlefuel tank
I have a 1971 Chevy C10 I have done a LSX swap on need advice about under bed fuel tank the engine is a 2004 5.3 ltr with a 460le transmission I have a 1992 stepside bed on the truck any help would be...
View Articlestormcustoms68
hey everyone, i'm new on this site and wanted to say hello. i'm building a 1975 olds 442 with a 455 in it right now and its a little exciting. i build street rods for a living but this is the 1st time...
View ArticleEdelbrock Air Gap vs Edelbrock Air Gap RPM
Edelbrock makes the Air Gap 0-5500rpms and the Air Gap RPM 1500-6500rpms.. Is there really a big difference between the two? They both are Air Gaps and im sure the Air Gap RPM is more for the higher...
View Articlehuge backfires through carb
I recently decided to put together a sbc I had laying around. I used a lightly used crate short block and put 2.02 heads on it. Cant get it to run and I am getting the loudest backfires I have ever...
View Article350 Weiand 177
Hi all, This is my first post. My name is Bill and I reside in Perth, Western Australia, Australia. My question is about the Weiand 177 blower on a SBC 350. The combo consists of a 350ci 30 thou...
View ArticleYour DreamRide with any classic Motor
If you could have any classic car or truck with any engine.... what would it be?????? i would have a 67 nova with a 383 that rev's like a 327 , a 200r4 transmission, 3.42 gears and it would have...
View Article468 BBC F2 procharger build need help
Im putting together a 468 BBC with a F2 Procharger on its way. I don't really know a ton about the procharger systems and I would love the help of experienced people so any help is a plus thanks. I...
View Articleanyone know this measurement
Anyone know what rearend will fit under a model-a I think it measures 56.50 inches,and I think a maverick rearend will fit. I am going to remove the tork tube and run a open rearend. All help is...
View ArticlePrepping aftermarket panels for paint?
I have new fenders that I want to prime and paint. They have the factory semi-gloss paint/coating on them. The question I have is what level of sanding will these need for proper adhesion? (suggested...
View ArticleIs the manual transmission going away?
That's what it feels like to me. Being car/driving enthusiasts this really sucks. Ever since I learned how to drive stick I've wanting it in every car Id own. But just looking around at new cars it...
View ArticleClik here to view.
oh no mr bean
Giant bill for fixing Rowan Atkinson's McLaren Last Updated: Friday, February 08, 2013 Share on facebook Share on twitter Share on google Share on email More Sharing Services 0 LONDON -- (AP) Everyone...
View Article